Printer Management Interface Without Authentication

A printer's management interface allows administrative access without a password, so anyone on the network can change its settings and read the information it holds.

SeverityHigh
CVSS 3.17.3 CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L Open in the calculator
CVSS 4.06.9 CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:L/VA:L/SC:N/SI:N/SA:N Open in the calculator
CWECWE-1188: Initialization of a Resource with an Insecure Default
MITRE ATT&CKT1552 Unsecured Credentials
CategoryBroken Access Control

Description

The printer or multifunction device exposes its management interface, usually the embedded web server on HTTP or HTTPS, without requiring an administrator password. Many devices ship with no administrator password set, or with administrative pages open to anyone, and the setting is not changed when the device is installed. The same devices often expose other management protocols, such as SNMP, Telnet, FTP or the raw printing port on TCP 9100 with PJL commands, which may also accept changes without authentication.

An attacker on the network can therefore read and change the device's configuration, view address books and job logs, redirect scan-to-email or scan-to-folder destinations to capture scanned documents, change network settings, upload firmware where permitted, or make the device unavailable. Many devices also store service account credentials for LDAP address book lookups, SMTP or file shares: by pointing those settings at a host they control and triggering a connection, an attacker can often capture the stored credentials (a pass-back attack), and these may be valid domain credentials. How serious this is depends on the credentials and documents the device handles.

The issue is confirmed by browsing to the device's web interface and reaching configuration pages, such as network, security, address book, scan destination or firmware update settings, without being asked for credentials. Scanners, and printer-focused tools such as the Printer Exploitation Toolkit (PRET), can also identify unprotected management functions.

Remediation

Protect every management interface on the device:

  • Set a strong, unique administrator password on the embedded web server and on every other management protocol the device supports, and keep it in the organisation's password manager. Apply this to every device, ideally through the vendor's fleet management tool so that new and reset devices are covered.
  • Disable management protocols and services that are not needed, such as Telnet, FTP, SNMP write access and unused printing protocols, and use HTTPS for the web interface.
  • Restrict management access to an administration network or specific administrator hosts, and place printers in their own network segment.
  • Use dedicated, least-privileged service accounts for LDAP, SMTP and scan-to-folder functions, use encrypted protocols such as LDAPS for them, and change any credentials stored on devices that were found unprotected.
  • Keep device firmware up to date.

Confirm the fix by browsing to each device's management interface and checking that configuration pages require authentication.

References


Add This Finding to Your Library

In Pental this write-up is in Settings, Library. Add to my library copies it into your own, rated in your firm's CVSS version, ready to put in your own words.

Free trial  ·  No card required

Only need the reporting? Our reporting tool is free and open source, with the same library.


More Network Services Findings

Every Network Services finding